Lateral move irrigation
Track DPP two/four irrigation equipment is a parallel movement type, the center and all across the body moving parallel to flow from the center through the nozzle body are evenly distributed on the surface of irrigation, referred to as machine translation.
Structure characteristics
The operation is flexible and convenient, and can pass through the farmland, which is suitable for narrow and long plots, and the walking control area occupies small area, without irrigation dead angle, and the land utilization rate reaches 100%. It can also walk in irregularly shaped or L shaped farmland, or drag it to another farm.
application area
Two irrigation machine is suitable for rectangular or trapezoidal plots, plots of land supply mode can be used along the canal or water supply by water drag. The power system adopts the diesel generator to supply or drag the cable construction site, and uses the trench guidance.
Specification parameter
Serial number |
project |
Specification parameter |
1 |
water main |
6-5/8”(168mm*3mm wall thickness) |
2 |
Reinforced type |
8”(203mm) |
3 |
Standard type per span |
6-5/8”(168mm)x 54.5m |
4 |
Lengthened span |
61.3m |
5 |
Cantilever tube |
141mm x 13.4m |
6 |
Cantilever lengthening tube |
101mm x 13.4m |
7 |
Working power supply and voltage |
Generator power supply:380V/50HZ |
8 |
power |
4—11KW |
9 |
Tire specification |
14.9 x 24 tyre |
10 |
Walking mode |
Electric drive gear box |
11 |
Motor power |
0.75horsepower --1.5horsepower |
12 |
Speed of electric drive gear box |
40:1 |
13 |
Translation type tire turbine reducer |
50:1 |